EPON/GPON/XPON/OLT
  • About Us
  • Product
  • Solution
  • Download
  • Service Support
  • Contact Us
  • 1G3F+2WIFI+CATV+POTS EPON/GPON ONU

    1G3F+2WIFI+CATV+POTS  EPON/GPON ONU
    Support EPON and GPON Mode, and switch mode automatically Support ONU auto-discovery/Link detection/remote upgrade of software WAN connections support Route and Bridge mode Route mode supports PPPoE/DHCP/ static IP Support WIFI Interface and multiple SSID Support QoS and DBA Support port Isolation and port vlan configuration Support Firewall function and IGMP snooping multicast feature Support  LAN IP and DHCP Server configuration Support Port Forwarding and Loop-Detect Support TR069 remote configuration and maintenance Support CATV interface for Video ServiceSupport POTS interface for Voip Service Specialized design for system breakdown prevention to  maintain stable system.

    1G3F+WIFI+CATV+POTS series is designed as HGU(Home Gateway Unit) in deferent FTTH solutions by T-TECH, The carrier-class FTTH application provides data service access.
    1G3F+WIFI+CATV+POTS series is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON when it access to the EPON OLT or GPON OLT.
    1G3F+WIFI+CATV+POTS series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X
    1G3F+WIFI+CATV+POTS series is designed by Realtek chipset 9603C.
    Technical item Details
    PON Interface 1 G/EPON port(EPON PX20+ and GPON Class B+)
    Receiving sensitivity: ≤-27dBm
    Transmitting optical power: 0~+4dBm
    Transmission distance: 20KM
    Wavelength TX: 1310nm, RX: 1490nm
    Optical Interface SC/APC Connector
    POTS interface 1 FXS, RJ11 connector
    Support: G.711/G.723/G.726/G.729 codec
    Support: T.30/T.38/G.711 Fax mode, DTMF Relay
    Line testing according to GR-909
    LAN Interface 1 x 10/100/1000Mbps and 3 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half,
    RJ45 connector
    CATV interface RF, optical power : +2~-18dBm
    Optical reflection loss: ≥45dB
    Optical receiving wavelength: 1550±10nm
    RF frequency range: 47~1000MHz,  RF output impedance: 75Ω
    RF output level: 78dBuV
    AGC range: 0~-15dBm
    MER: ≥32dB@-15dBm
    Wireless Compliant with IEEE802.11b/g/n,
    Operating frequency: 2.400-2.4835GHz
    support MIMO, rate up to 300Mbps,
    2T2R,2 external antenna 5dBi,
    Support: multiple SSID
    Channel: Auto
    Modulation type: DSSS, CCK and OFDM
    Encoding scheme: BPSK, QPSK, 16QAM and 64QAM
    LED 14, For Status of POWER,LOS,PON,SYS,LAN1~LAN4,WIFI,WPS,Internet,FXS,Worn,
    Normal(CATV)
    Push-Button 3,For Function of Reset,WLAN,WPS
    Operating Condition Temperature: 0℃~+50℃
    Humidity: 10%~90%(non-condensing)
    Storing Condition Temperature: -30℃~+60℃
      Humidity: 10%~90%(non-condensing)
    Power Supply DC 12V/1A
    Power Consumption ≤6W
    Dimension 155mm×92mm×34mm(L×W×H)
    Net Weight 0.24K

    Pilot Lamp

    Status

    Description

    PWR

    On

    The device is powered up.

    Off

    The device is powered down.

    PON

    On

    The device has registered to the PON system.

    Blink

    The device is registering the PON system.

    Off

    The device registration is incorrect.

    LOS

    Blink

    The device doses not receive optical signals.

    Off

    The device has received optical signal.

    SYS

    On

    The device system runs normally.

    Off

    The device system runs abnormally.

    INTERNET

    Blink

    The device network connection is normal.

    Off

    The device network connection is abnormal.

    WIFI

    On

    The WIFI interface is up.

    Blink

    The WIFI interface is sending or/and receiving data (ACT).

    Off

    The WIFI interface is down.

    FXS

    On

    Phone has registered to the SIP Server.

    Blink

    Phone has registered and data transmission (ACT).

    Off

    Phone registration is incorrect.

    WPS

    Blink

    The WIFI interface is securely establishing a connection.

    Off

    The WIFI interface does not establish a secure connection.

    LAN1~LAN4

    On

    Port (LANx) is connected properly (LINK).

    Blink

    Port (LANx) is sending or/and receiving data (ACT).

    Off

    Port (LANx) connection exception or not connected.

    Worn

    (CATV)

    On

    Input optical power is higher than 3dbm or lower than -13dbm

    Off

    Input optical power is between -13dbm and 3dbm

    Normal

    (CATV)

    On

    Input optical power is between -13dbm and 3dbm

    Off

    Input optical power is higher than 3dbm or lower than -13dbm
    Application
    Typical Solution:FTTO(Office), FTTB(Building),FTTH(Home)
    Typical Business:INTERNET,IPTV,VOD,Voip,IP Camera,CATV etc

    T-1G1F+2WIFI+CATV+POTS-EU 1G1F+2WIFI+CATV+POTS (9603C Scheme) PCS
    T-1G3F+2WIFI+CATV+POTS-EU 1G3F+2WIFI+CATV+POTS  (9603C Scheme) PCS

    T-1G1F+2WIFI+CATV+POTS-GU 1G1F+2WIFI+CATV+POTS (9603C Scheme) PCS
    T-1G3F+2WIFI+CATV+POTS-GU 1G3F+2WIFI+CATV+POTS  (9603C Scheme) PCS

  • Go Top
T-tech Copyright